dermalize phantom ultra-thin film pack sterile
Ultra Thin Protective Tattoo Film is an innovative product designed to provide the highest level of comfort. It is half the normal thickness (0.01mm) of most similar products available on the market; it is extremely flexible and comfortable to wear, sterile and its matte finish makes it almost invisible on tattooed skin.
Dermalize Phantom Ultra-Thin Tattoo Barrier Film is available to professional tattoo artists as Ultra-Thin Tattoo Barrier Film packs of 7 pre-cut sheets (15cm x 10cm) individually packed in sterile bags for continued aftercare at home. ideal for the first application after finishing the tattoo.
Dermalize Phantom – Ultra-thin protective tattoo film is a latex-free breathable film, made of sterile ultra-thin polyurethane and hypoallergenic acrylic glue. It is registered as a medical device of class Is with the Italian Ministry of Health.
Tips for applying the Dermalize film
-Before beginning with the application of the product, be sure to wash your hands thoroughly and wear clean gloves.
-Measure the tattoo well and cut pieces in the sizes you really need.
-Start by cleaning and drying the tattoo well.
-Place the adhesive surface leaving at least 3-5 cm. from the edge of the tattoo. To adhere it to the skin, press lightly with your fingers.
-If the tattoo is not completely covered, add additional sheets that overlap each other at 2 cm.
-The first application lasts approximately 12 to 24 hours. The following applications from 24 to 48 hours.
-Before each application, the affected area should be cleaned with soap and water and dried very well.
-If the film comes off, it will have to be replaced with a new one.
-To remove the film, one of the corners of the film must be lifted and stretched horizontally along the surface of the skin to eliminate the adhesive bond. Continue stretching from the edge towards the center. When both sides of the film are partially removed, it should be grasped on both sides and stretched horizontally and parallel to the skin until completely removed. You can help with water to remove the adhesive bond of the skin.
Dermalize Phatom:
Ultra Thin film Packs
7 units of 15cm x 10m
Innovation 2023, sterile product
From 121€
100% safe
Ultra Thin Protective Tattoo Film is an innovative product designed to provide the highest level of comfort. It is half the normal thickness (0.01mm) of most similar products available on the market; it is extremely flexible and comfortable to wear, sterile and its matte finish makes it almost invisible on tattooed skin.
Dermalize Phantom Ultra-Thin Tattoo Barrier Film is available to professional tattoo artists as Ultra-Thin Tattoo Barrier Film packs of 7 pre-cut sheets (15cm x 10cm) individually packed in sterile bags for continued aftercare at home. ideal for the first application after finishing the tattoo.
Dermalize Phantom – Ultra-thin protective tattoo film is a latex-free breathable film, made of sterile ultra-thin polyurethane and hypoallergenic acrylic glue. It is registered as a medical device of class Is with the Italian Ministry of Health.
Tips for applying the Dermalize film
-Before beginning with the application of the product, be sure to wash your hands thoroughly and wear clean gloves.
-Measure the tattoo well and cut pieces in the sizes you really need.
-Start by cleaning and drying the tattoo well.
-Place the adhesive surface leaving at least 3-5 cm. from the edge of the tattoo. To adhere it to the skin, press lightly with your fingers.
-If the tattoo is not completely covered, add additional sheets that overlap each other at 2 cm.
-The first application lasts approximately 12 to 24 hours. The following applications from 24 to 48 hours.
-Before each application, the affected area should be cleaned with soap and water and dried very well.
-If the film comes off, it will have to be replaced with a new one.
-To remove the film, one of the corners of the film must be lifted and stretched horizontally along the surface of the skin to eliminate the adhesive bond. Continue stretching from the edge towards the center. When both sides of the film are partially removed, it should be grasped on both sides and stretched horizontally and parallel to the skin until completely removed. You can help with water to remove the adhesive bond of the skin.
Review sent